Thoughtless Ramblings

Το laptop έρχεται με προεγκατεστημένο το Linpus Linux Lite, το οποίο είναι ένα τροποποιημένο fedora 8.

Σαν βάση για το περιβάλλον εργασίας, το Xfce 4.4.2, αν και αρκετά από τα τμήματά του συμπεριφέρονται διαφορετικά.

Το run dialog βγαίνει στο Alt+F2 όμως και περιλαβάνεται το Terminal, οπότε προκύπτουν αρκετά ενδιαφέροντα πραγματάκια:
[user@localhost ~]$ uname -a
Linux localhost 2.6.23.9lw #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008 i686 i686 i386 GNU/Linux


[user@localhost ~]$ cat /etc/fedora-release
Fedora release 8 (Werewolf)

Αυτό που διαπίστωσα είναι πως έχουν αφήσει και τα binaries του fedora εκτός των τροποποιημένων, οπότε μπόρεσα λ.χ. να τρέξω το “κανονικό” xfce4-panel, που επιτρέπει το μενού στο δεξι κλικ, και μπόρεσα να προσθέσω ένα κανονικό Xfce menu εκεί. Αλλαγές έχουν επίσης ο Thunar και το xfdesktop.

Επίσης, ο χρήστης που δημιουργείται με το πρώτο άνοιγμα έχει πρόσβαση στο sudo χωρίς κωδικό, οπότε ένα sudo su – αργότερα είμουν υπερχρήστης. Μετά άλλαξα το /etc/sysconfig/i18n και στην επόμενη επανεκκίνηση είχα το μεγαλύτερο τμήμα του περιβάλλοντος στα Ελληνικά.

Περιλαμβάνεται επίσης το yum, ρυθμισμένο στα αποθετήρια του fedora (!)

Τι επιπτώσεις μπορεί να έχει αυτό θα το διαπιστώσω αφού πάρω ένα αντίγραφο ασφαλείας του συστήματος…

Από αυτονομία πάει αρκετά καλά επίσης. Χθες μου κράτησε γύρω στις 2,5 ώρες με wifi και browsing (κατά κύριο λόγο), με τη “μικρή” μπαταρία.

Update 16/08.2008: Έπειτα από δημοφιλή απαίτηση, το lspci & dmesg output του Aspire One

Επίσης, τα τροποιημένα sources των εφαρμογών που διατίθενται από την Acer στον ftp server τους

lspci:
00:00.0 Host bridge: Intel 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel 82801G (ICH7 Family) HD Audio Controller: Realtek ALC662G/268 (rev 02)
00:1c.0 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Ethernet controller: Atheros AR5006EG 802.11 b/g Wireless PCI Express Adapter (rev 01)
dmesg:
Linux version 2.6.23.9lw (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #105 SMP PREEMPT Fri Jun 27 18:56:59 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
117MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 259328) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 259328
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 259328
On node 0 totalpages: 259328
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 234 pages used for memmap
HighMem zone: 29718 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.4 present.
ACPI: RSDP 000FE020, 0024 (r2 INTEL )
ACPI: XSDT 3F4FE120, 0064 (r1 INTEL Napa 1 1000013)
ACPI: FACP 3F4FC000, 00F4 (r4 INTEL Napa 1 MSFT 1000013)
ACPI: DSDT 3F4F2000, 5D05 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: FACS 3F488000, 0040
ACPI: SSDT 3F4FD000, 04C4 (r2 PmRef CpuPm 3000 INTL 20051117)
ACPI: HPET 3F4FB000, 0038 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: APIC 3F4FA000, 0068 (r2 INTEL Napa 1 MSFT 1000013)
ACPI: MCFG 3F4F9000, 003C (r1 INTEL Napa 1 MSFT 1000013)
ACPI: ASF! 3F4F8000, 00A5 (r32 INTEL Napa 1 MSFT 1000013)
ACPI: SLIC 3F4F1000, 0180 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: BOOT 3F4F0000, 0028 (r1 INTEL Napa 1 MSFT 1000013)
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:12 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:12 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 257302
Kernel command line: ro root=LABEL=linpus vga=0x311 splash=silent loglevel=1 console=tty1 quiet nolapic_timer
bootsplash: silent mode.
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1596.074 MHz processor.
Console: colour dummy device 80x25
console [tty1] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1023844k/1037312k available (1904k kernel code, 12016k reserved, 543k data, 188k init, 119128k highmem)
virtual kernel memory layout:
fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0369000 - 0xc0398000 ( 188 kB)
.data : 0xc02dc0d8 - 0xc0363fa4 ( 543 kB)
.text : 0xc0100000 - 0xc02dc0d8 (1904 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3196.03 BogoMIPS (lpj=6392078)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.98 BogoMIPS (lpj=6383961)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0040c39d 00000000 00000001 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00003940 0040c39d 00000000 00000001 00000000
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Total of 2 processors activated (6388.01 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
PM: Fastpoweoff 1.0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (evxfregn-0109): lawson ec 06
[20070126]
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI Error (evxfregn-0109): lawson ec 06
[20070126]
ACPI: System BIOS is requesting _OSI(Linux)
ACPI: If "acpi_osi=Linux" works better,
Please send dmidecode to linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Lawson Test 3
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 0500-053f claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
pnp: 00:01: ioport range 0x200-0x20f has been reserved
pnp: 00:01: ioport range 0x164e-0x164f has been reserved
pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
IO window: 5000-5fff
MEM window: 57300000-583fffff
PREFETCH window: 50000000-50ffffff
PCI: Bridge: 0000:00:1c.1
IO window: 3000-4fff
MEM window: 56300000-572fffff
PREFETCH window: 51000000-520fffff
PCI: Bridge: 0000:00:1c.2
IO window: 2000-2fff
MEM window: 55200000-562fffff
PREFETCH window: 52100000-530fffff
PCI: Bridge: 0000:00:1c.3
IO window: 1000-1fff
MEM window: 54100000-551fffff
PREFETCH window: 53100000-540fffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 102k freed
Simple Boot Flag value 0x84 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x80
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 2400k, total 7872k
vesafb: mode is 640x480x16, linelength=1280, pages=11
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 43971 bytes,<6>...found (640x480, 43983 bytes, v3).
Console: switching 1 lawson
consoles lawson 0
Console: switching consoles 1-17 to colour frame buffer device 78x25
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GME Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0x40000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000160a0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000160a8 irq 15
ata2.00: ATA-5: P-SSD1800, Ver2.Y0C, max UDMA/66
ata2.00: 15761088 sectors, multi 0: LBA
ata2.00: configured for UDMA/66
scsi 1:0:0:0: Direct-Access ATA P-SSD1800 Ver2 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 15761088 512-byte hardware sectors (8070 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
TuxOnIce: No attempt was made to resume from any image that might exist.
Freeing unused kernel memory: 188k freed
Warning: unable to open an initial console.
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input0
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Initializing USB Mass Storage driver...
mtrr: no more MTRRs available
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ACPI: SSDT 3F380C90, 0239 (r2 PmRef Cpu0Ist 3000 INTL 20051117)
ACPI: SSDT 3F37FE10, 01C7 (r2 PmRef Cpu0Cst 3001 INTL 20051117)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F380F10, 00D0 (r2 PmRef Cpu1Ist 3000 INTL 20051117)
ACPI: SSDT 3F37EF10, 0083 (r2 PmRef Cpu1Cst 3000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: AC Adapter [ACAD] (off-line)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/virtual/input/input3
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /devices/virtual/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input5
ACPI: Sleep Button (CM) [SLPB]
input: Video Bus as /devices/virtual/input/input6
ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
ACPI: Battery Slot [BAT1] (battery present)
r8101 Fast Ethernet driver 1.008.08-2-1-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Identified chip type is 'RTL8102E'.
eth0: RTL8101E at 0xf8b30000, 00:1e:68:9f:a1:f7, IRQ 17
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5212, RF5111, RF5112, RF2413, RF5413)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ath_dfs: Version 2.0.0
Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
intel_rng: FWH not detected
wlan: 0.8.4.2 (Atheros/multi-bss)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ath_rate_atheros: Version 2.0.1
Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ath_pci: Acer-5.3.2.13-2008-June-13
Linux video capture interface: v2.00
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:03:00.0 to 64
#####################################################
####################WLAN ID:001c ####################
#####################################################
Setting ah_eepromDetach
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (SVN r215)
SAMSoft library init ...
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64

ForteMedia SAM-Soft Library Loaded!

ALC INITwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: mac 14.2 phy 7.0 radio 10.2
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0×55200000, irq=18
Marking TSC unstable due to: possible TSC halt in C2.
Time: hpet clocksource has been installed.
Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
Could not switch to high resolution mode on CPU 1
lapic is not functional.
Could not switch to high resolution mode on CPU 0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.0:pcie02
pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
pciehp: Device 0000:02:00.0 already exists at 2:0, cannot hot-add
pciehp: Cannot add device 0×2:0
Load service driver hpdriver on pcie device 0000:00:1c.1:pcie02
pciehp: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
pciehp: Device 0000:03:00.0 already exists at 3:0, cannot hot-add
pciehp: Cannot add device 0×3:0
Load service driver hpdriver on pcie device 0000:00:1c.2:pcie02
pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
Load service driver hpdriver on pcie device 0000:00:1c.3:pcie02
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
PM: Fastpoweroff, default profile added
Clocksource tsc unstable (delta = -177890742 ns)
wlan: mac acl policy registered
sc_softled = 0
ath_vap_create: LED ON
r8101: eth0: link down
2 del_timer sc_rfkilltimer
ath_stop_locked: LED OFF 2
del_timer sc_rfkilltimer
aufs 20080505
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k